Cisco ACI and CCNA live online batches are starting from 24th June 2023. Join experts today. Detailed Information on Implementing and Operating Cisco Enterprise Network Core Technologies (ENCOR) v1.0 - UniNets Blog

Detailed Information on Implementing and Operating Cisco Enterprise Network Core Technologies (ENCOR) v1.0

Detailed Information on Implementing and Operating Cisco Enterprise Network Core Technologies (ENCOR) v1.0

This article will cover all the information on Implementing and Operating Cisco Enterprise Network Core Technologies (ENCOR) v1.0. Starting from what is CCNP ENCOR (350-401) to why be it good choosing ENCOR 350-401 over other certification. Before moving to the introduction we all are aware about the changes made by Cisco and were implemented on Feb 24, 2020.

Changes are scary and nobody is always ready to deal with those changes. It’s new for everyone. Everyone have to give their best and work according to the changes made. The changes made are mainly in the syllabus of the course and when it comes to considering the level of exam, then yes the upgrade certification is quite tough than the earlier certification because this certification has all the updated skills and information. The exam is difficult to pass because the exam is associated with multiple Cisco Enterprise certifications.

Introduction                                                                                

The ENCOR 350-401 exam stands for Enterprise Core particularly emphasizes Cisco’s move from uncommon, advanced capabilities to the networking requirements for current job roles.

If you need to prepare for 350-401(ENCOR) Implementing Cisco Enterprise Network Core Technologies examination this course will guide you for the same. This course is part of four new certifications which are given below:-

  • CCNP Enterprise
  • CCIE Enterprise Infrastructure
  • CCIE Enterprise Wireless
  • Cisco Certified Specialist – Enterprise Core

Course Highlights

In this course candidate will learn about:

  • VLANs and trunks.
  • The different spanning-tree versions like RSTP, MST, and STP.
  • How to configure Ether channels / Link aggregation.
  • Routing protocols including EIGRP, OSPF, and BGP.
  • Cisco wireless.
  • Multicast protocols like sparse, sparse-dense, and PIM-dense mode.
  • Architectures and Network designs such as the leaf-spine architecture or campus design.
  • How to configure NAT/PAT and first hop redundancy protocols like GLBP, HSRP, or VRRP.
  • How to configure Quality of Service (QoS) topics like queuing, policing, and shaping.
  • How to troubleshoot and monitor your network.
  • How to secure your routers and switches.
  • Different virtualization technologies.
  • And many other topics…

This course is designed by trainers to prepare network engineers for the exam which has replaced R&S exam i.e. the new CCNP exam.

Who should enroll

Candidates like Mid-level network engineers, Network administrators, Network support technicians and Help desk technicians etc. can pursue for this certification. Like other new Cisco certifications, this implies that an individual will have to qualify both a core exam and a concentration exam of their choice. The best thing about this setup is each concentration exam will also provide candidate a Cisco specialist certification.

The core exams changes according to your choice or interest or which path you decide to choose. Even with the core exam, a qualifying score will get them a specialist certification. In this case i.e. the Cisco Certified Specialist – Enterprise Core, a candidate will be getting a certification even if he/she has just got the passing marks. Moreover, now onwards the core exam for the 350-401 ENCOR is requirement for two certifications i.e. CCIE Enterprise Wireless and CCIE Enterprise Infrastructure.

CCNP Enterprise: Core Exam Options

Once you complete the 350-401 ENCOR core exam, candidate have six various concentration exams to pick from. The one you decide to go with will depend on the area you choose as your specialty. Let’s take a quick look at the different exams. With this examination, candidate will test their knowledge of troubleshooting and implementing advanced routing services and technologies. While you are preparing for CCNP Enterprise, it is expected from aspirants to have an understanding of the following:

  • Layer 3
  • VPN services
  • Infrastructure security
  • Infrastructure services
  • Infrastructure automation

Let’s say you earned one of the retired certification such as CCNA Routing and Switching before February 24, 2020. We are assuming that you would have transitioned to the new CCNA at that point. Most of the skills and knowledge acknowledged by the CCNP Enterprise are useful in real-world enterprise network environments. For instance, an individual will get knowledge and skills according to the course he chose to opt.

Difficulty of the New CCNP exams

No success tastes good if there are no difficulties or hardwork. The real happiness is to face the difficulties and make your success happen. If are concerned about the difficulties you would face or how difficult is the exam, then the answer to this question would not be easy to share because the there is no one size fits all answer to that question.

But as per our information and experience the answer is yes, the current examination is harder than the old CCNP exams. But you know as per the technology has moved to an advancement the examination was very old if compared. They were in need to upgraded according to the technology and advancement so that candidates are aware of the all the knowledge and skills of upcoming technology.

There were many things which were not considered in old CCNP exams like understanding python and some basic scripts. However, you should not hesitate just because of the updates. Your hardwork will pay off and your knowledge and skills are the major things which will help you to qualify your examination.

About the author

jitender administrator

Leave a Reply