Detailed Information on Implementing and Operating Cisco Enterprise Network Core Technologies (ENCOR) v1.0
This article will cover all the information on Implementing and Operating Cisco Enterprise Network Core Technologies (ENCOR) v1.0. Starting from what is CCNP ENCOR (350-401) to why be it good choosing ENCOR 350-401 over other certification. Before moving to the introduction we all are aware about the changes made by Cisco and were implemented on Feb 24, 2020.
Changes are scary and nobody is always ready to deal with those changes. It’s new for everyone. Everyone have to give their best and work according to the changes made. The changes made are mainly in the syllabus of the course and when it comes to considering the level of exam, then yes the upgrade certification is quite tough than the earlier certification because this certification has all the updated skills and information. The exam is difficult to pass because the exam is associated with multiple Cisco Enterprise certifications.
Introduction
The ENCOR 350-401 exam stands for Enterprise Core particularly emphasizes Cisco’s move from uncommon, advanced capabilities to the networking requirements for current job roles.
If you need to prepare for 350-401(ENCOR) Implementing Cisco Enterprise Network Core Technologies examination this course will guide you for the same. This course is part of four new certifications which are given below:-
- CCNP Enterprise
- CCIE Enterprise Infrastructure
- CCIE Enterprise Wireless
- Cisco Certified Specialist – Enterprise Core
Course Highlights
In this course candidate will learn about:
- VLANs and trunks.
- The different spanning-tree versions like RSTP, MST, and STP.
- How to configure Ether channels / Link aggregation.
- Routing protocols including EIGRP, OSPF, and BGP.
- Cisco wireless.
- Multicast protocols like sparse, sparse-dense, and PIM-dense mode.
- Architectures and Network designs such as the leaf-spine architecture or campus design.
- How to configure NAT/PAT and first hop redundancy protocols like GLBP, HSRP, or VRRP.
- How to configure Quality of Service (QoS) topics like queuing, policing, and shaping.
- How to troubleshoot and monitor your network.
- How to secure your routers and switches.
- Different virtualization technologies.
- And many other topics…
This course is designed by trainers to prepare network engineers for the exam which has replaced R&S exam i.e. the new CCNP exam.
Who should enroll
Candidates like Mid-level network engineers, Network administrators, Network support technicians and Help desk technicians etc. can pursue for this certification. Like other new Cisco certifications, this implies that an individual will have to qualify both a core exam and a concentration exam of their choice. The best thing about this setup is each concentration exam will also provide candidate a Cisco specialist certification.
The core exams changes according to your choice or interest or which path you decide to choose. Even with the core exam, a qualifying score will get them a specialist certification. In this case i.e. the Cisco Certified Specialist – Enterprise Core, a candidate will be getting a certification even if he/she has just got the passing marks. Moreover, now onwards the core exam for the 350-401 ENCOR is requirement for two certifications i.e. CCIE Enterprise Wireless and CCIE Enterprise Infrastructure.
CCNP Enterprise: Core Exam Options
Once you complete the 350-401 ENCOR core exam, candidate have six various concentration exams to pick from. The one you decide to go with will depend on the area you choose as your specialty. Let’s take a quick look at the different exams. With this examination, candidate will test their knowledge of troubleshooting and implementing advanced routing services and technologies. While you are preparing for CCNP Enterprise, it is expected from aspirants to have an understanding of the following:
- Layer 3
- VPN services
- Infrastructure security
- Infrastructure services
- Infrastructure automation
Let’s say you earned one of the retired certification such as CCNA Routing and Switching before February 24, 2020. We are assuming that you would have transitioned to the new CCNA at that point. Most of the skills and knowledge acknowledged by the CCNP Enterprise are useful in real-world enterprise network environments. For instance, an individual will get knowledge and skills according to the course he chose to opt.
Difficulty of the New CCNP exams
No success tastes good if there are no difficulties or hardwork. The real happiness is to face the difficulties and make your success happen. If are concerned about the difficulties you would face or how difficult is the exam, then the answer to this question would not be easy to share because the there is no one size fits all answer to that question.
But as per our information and experience the answer is yes, the current examination is harder than the old CCNP exams. But you know as per the technology has moved to an advancement the examination was very old if compared. They were in need to upgraded according to the technology and advancement so that candidates are aware of the all the knowledge and skills of upcoming technology.
There were many things which were not considered in old CCNP exams like understanding python and some basic scripts. However, you should not hesitate just because of the updates. Your hardwork will pay off and your knowledge and skills are the major things which will help you to qualify your examination.
All you need to know about Implementing and Operating Cisco Enterprise Network Core Technologies (350-401 ENCOR) v1.0 exam
Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR)
The Implementing Cisco Enterprise Network Core Technologies (ENCOR: 350-401) v1.0 certification gives you the information and skills needed to secure wireless network infrastructure and troubleshoot any related issues. You’ll acquire knowledge how to execute and secure a wireless network infrastructure and Cisco Connect Mobile Experience to monitor and troubleshoot network issues and use Cisco Identity Service Engine (ISE), Cisco Prime Infrastructure (PI) and You’ll also learn the way to overlay network design by exploitation solutions like SD- WAN and SD- Access and to implement security principles within an enterprise network.
This course is a 120-minute exam associated with the CCNP Enterprise, CCIE Enterprise Wireless, CCIE Enterprise Infrastructure, and Cisco Certified Specialist – Enterprise Core certifications. This exam will tests an aspirant’s knowledge and skills of implementing core enterprise network technologies including dual stack (IPv4 and IPv6) architecture, network security, automation, network assurance, virtualization, and infrastructure. Implementing Cisco Enterprise Network Core Technologies course helps aspirants to prepare for this exam.
This certification course helps you prepare to take the 350-401 Implementing Cisco Enterprise Network Core Technologies (ENCOR) exams, which is part of four new certifications:
- CCNP® Enterprise
Information and skills required to control, manage, and secure wireless and wired networks is provided by the CCNP Enterprise (ENCOR) v1.0 certification course. This certification is also known as (350-401 ENCOR) Implementing and Operating Cisco Enterprise Network Core Technologies. Moreover addition to this, you will also learn to implement security principles within an enterprise network and how to overlay network design by using solutions like SD-WAN and SD-Access.
- CCIE® Enterprise Infrastructure
Cisco CCIE Enterprise Infrastructure Certification v1.0 gives you opportunities to networking candidates to enlarge this potential endlessly. Offering the advanced enterprise infrastructure solutions skills, CCIE Enterprise Infrastructure Certification prepares you to be a master of technical.
This certification positions you for the professional level job roles in enterprise infrastructure technologies by delivery in confidence and capabilities on board.
- CCIE Enterprise Wireless
We develop the CCIE Enterprise Wireless certification to assist you demonstrate your abilities within the ever-changing environment of wireless technologies. The certification covers core technology areas and validates your end-to-end lifecycle skills in advanced enterprise wireless networks, from design and planning to optimizing and operating.
- Cisco Certified Specialist – Enterprise Core
Cisco Certified Specialist- Enterprise core helps you to learn how to execute automation, virtualization, and network assurance into your organization. Core enterprise network technologies such as dual stack (IPv4 and IPv6) architecture will also be discovered by this course.
How you’ll benefit
This course will help you:
- Configure, manage, and troubleshoot enterprise wired and wireless networks
- You can execute security objectives within an enterprise network
- This examination (350-401) Implementing Cisco Enterprise Network Core Technologies (ENCOR)is prepared by this course.
- Combine your technical abilities with design skills to position your organization for digital alteration
- Differentiate yourself as the best from operating to deploying and optimizing complex wireless technologies
- Attach wireless automation efficiency to your areas of proficiency
- When you pass the qualifying exam you will earn a Specialist certification
- On all your social media profiles you can keep that CCIE logo
- Execute and safe a Cisco wireless network infrastructure
- Take the Implementing Cisco Enterprise Wireless Networks (300-430 ENWLSI) Certify your information and prepare for exam
What You Will Learn
- Implement network settings to produce a secure wireless network infrastructure
- Improve security problems as they relate to the wireless network infrastructure
- Execute a safe wireless consumer and troubleshoot wireless consumer connectivity
- Execute and troubleshoot QoS in wireless networks
- Execute and Improve advanced abilities in wireless network services
- This certification acknowledges you as a master of technical of the enterprise networking within the ever changing space of technology.
- This certification distinguishes you as the best, with the skills of deploying, operating and optimizing complex enterprise networks, give your company a digital transportation together with your technical expertise and designing skills.
- Networking automation and programmability is the field on which this certification trains you.
- Concepts of Enhanced Interior Gateway Routing Protocol (EIGRP) like features, path selection and metrics
- Explain the various network devices and components and the virtualization technology of servers and switches.
- Explain the components and concepts of wireless networking including Radio Frequency (RF) and antenna characteristics, and define the specific wireless standards
- Explain location services and wireless roaming.
- Explain how APs communicate with WLCs to obtain software, configurations, and centralized management
- Configure and verify Pre-shared Key (PSK) wireless client authentication on a WLC, Extensible Authentication Protocol (EAP), and WebAuth
- Explain the enterprise network security architecture, including personal firewalls, the purpose and function of VPNs, endpoint security, content security, logging, and other security characteristics.
- Explain the components and features of Cisco SD-WAN solutions, including the orchestration plane, control plane, data plane and management plane,
- Explain APIs in vManage and Cisco DNA Center
- Explain the concepts, purpose, and features of multicast protocols, including Internet Group Management Protocol (IGMP) v2/v3, Protocol-Independent Multicast (PIM) dense mode/sparse mode, and rendezvous points
- Explain network programmability protocols like RESTCONF and Network Configuration Protocol (NETCONF) and Describe the need within the enterprise network
- Explain the concepts and characteristics of Quality of Service (QoS), and Describe basic Python components and conditionals with script writing and analysis
- Describe the purpose, function, characteristics, and workflow of Cisco DNA Center™ Assurance for network visibility, for Intent-Based Networking, proactive monitoring and application experience
- Describe the use of available network analysis and troubleshooting tools, which include show best practices in troubleshooting and debug commands
- While exploring the benefits and characteristics you will be able to execute scalable administration using Accounting, Authentication, and Authorization (AAA) and the local database
- Executing and optimization of Open Shortest Path First (OSPF)v2 and OSPFv3, including packet types, adjacencies, and areas, summarization, and route filtering for IPv4 and IPv6
- Executing External Border Gateway Protocol (EBGP) interdomain routing, path selection, and single and dual-homed networking
- Executing network redundancy using protocols including Virtual Router Redundancy Protocol (VRRP) and Hot Standby Routing Protocol (HSRP)
- Executing internet connectivity within Enterprise using static and dynamic Network Address Translation (NAT)
You’ll be ready to sit any of the following Cisco concentration exams, once you have qualified the 350-401 ENCOR exam:
- Implementing Cisco Enterprise Advanced Routing Services (ENARSI): 300-410 ENARSI
- Implementing Cisco SD-WAN Solutions (SDWAN300): 300-415 ENSDWI
- Designing Cisco Enterprise Network (ENSLD): 300-420 ENDSLD
- Designing Cisco Enterprise Wireless Networks (ENWLSD): 300-425 ENWLSD
- Implementing Cisco Enterprise Wireless Networks (ENWLSI): 300-430 ENWLSI
- Implementing Automation for Cisco Enterprise Solutions (ENAUI): 300-435 ENAUTO
If you want to pass CCNP Enterprise certification prepare any of these exams.
Or, if you’re objective is to qualify the CCIE Enterprise Infrastructure and CCIE Enterprise Wireless certifications, you’ll just need to complete the appropriate lab:
- CCIE Enterprise Infrastructure (CIE Enterprise Infrastructure v1.0 lab)
- CCIE Enterprise Wireless (CCIE Enterprise Wireless v1.0 lab)
Who should enroll?
- Help desk technicians
- Network administrators
- Network support technicians
- Mid-level network engineers
Job roles
This certification is valuable to the IT candidates and also to the workers since it is accepted worldwide. Achieving this certification improves the probability of moving up in the hierarchy depending on the organization.
Prerequisites
Knowledge and skills you should have before attending this course:
- Implementation of Enterprise LAN networks
- Basic knowledge of Enterprise routing and wireless connectivity
- Basic understanding of Python scripting